Description
Introducing the Solarmaax 200 GPD (gallons per day) / 757 LPD (liters per day) 12 or 24 V marine watermaker – an excellent option for serious offshore racers and cruisers. This watermaker is renowned for its lightweight, straightforward design, super compactness, easy installation and maintenance, and reliability. This watermaker is equipped with a diaphragm boost pump.
The Solarmaax features the cutting-edge hydraulic enhanced Clark Pump intensifier and energy recovery device, redefining industry standards for maximum efficiency. It is the ideal solution when high output is essential but space is at a premium.
With its extraordinarily low energy consumption, the system can be powered by solar panels, wind energy, or any Electromaax high-output marine alternator. The enhanced Clark pump’s longer cylinders make all Solarmaax watermakers exceptionally quiet. The package includes a complete installation kit, handheld salinity sensor, automatic flush system, and a product sample valve, all ensuring you have everything needed for optimal operation and maintenance.
The Solarmaax 12 represents the pinnacle of innovation for cruisers who prioritize energy efficiency and high-quality drinking water.
Warranty
Electromaax has a full 12 month limited warranty on ALL its enhanced Clark pumps. Other companies can charge more than $1,600.00 U.S.D for a rebuilt older Clark pump (under warranty more if out of warranty) and as high as $3,900.00 plus tax and shipping for a new one.
If properly maintained most Clark pump intensifiers will last decades, however sometimes though various circumstances beyond the owners control, they may need rebuilding. Electromaax now offers a 9 year extension for just $887.00 USD plus shipping both ways. This warranty extension is a type of insurance against forgetting to flush when left for months or years.
Electromaax Enhanced Clark Pump Warranty Rebuild Exchange Program
Have your Electromaax, high pressure “Enhanced Clark Pump” rebuilt or even exchanged by The Electromaax Factory.
Exchange program process 12 or 24 volt systems
– Once you receive a RMA, please Send us your enhanced Clark Pump to either Electromaax Canada or USA address
The factory will send you out at their discretion a rebuilt OR new pump. You only pay the shipping from either location back to you. The current turnaround time is 72 hours after receipt of your unit and acceptance that it meets the warranty conditions.
– The exchange pumps are in stock and as long as your returned Enhance Clark pump is 100% intact with no missing components. (if there are missing components the factory will quote fitting new ones)
– We will help you with any questions/concerns you may have when reinstalling the enhanced Clark pump.
For clients that are out of warranty, or not covered by any extended warranty we can rebuild or exchange any enhanced Clark pump for $1,555.00 USD (time of writing May 2023) this price may change without warning. The client pays any duties and taxes plus the shipping both ways.
Your Enhanced Clark pump MUST be 100% intact with no missing components, if you’re sending it in for rebuilt or even exchange. Again if there are missing components we will quote installing replacement ones.
CLARK PUMP MUST BE EITHER UNDER WARRANTY or EXTENDED WARRANTY
The warranty is voided by, but not limited to the following:
- Using chemicals not supplied by or certified by Electromaax
- Improper installation or operation
- Be 100% intact with no missing components
- You can only return the unit twice in the 9 year period
If you have any questions or concerns about the standard or extended 9-year Extended warranty of your system please contact us.
Membrane Maintenance
To maximize the lifespan and performance of your Watermaker membranes, the best practice is regular use. Freshwater flushing, frequently or automatically, can be set for 3, 6 or 9 days . Proper Pre-filtration filters: Use only high quality 5 micron 10” by 2.5” synthetic pleated Sediment Filter Elements; monitor your filter status gauge. And finally, proper preservation during extended periods of inactivity.
Operation and Regular Use
- Use the system regularly: Watermakers operate best when used frequently, ideally daily or at least once a week. Inactivity promotes bacterial growth and fouling, which can permanently damage the membrane.
- Avoid contaminated water: Do not operate the Watermaker in silty, oily, or polluted waters (e.g., harbors, marinas). Algae, high sediment content, and oils can quickly clog or ruin the membranes and pre-filters.
- Monitor performance: Routinely check the system’s operating pressure, feed water pressure, and the salinity (TDS – Total Dissolved Solids) of the product water. A sudden drop in output or an increase in salinity indicates a problem that needs immediate attention.
- Keep a log: Recording operating hours, flow rates, and water quality values helps you track trends, anticipate maintenance needs, and diagnose issues early.
Flushing and Maintenance
- Flush with fresh water: After each use, especially before a period of inactivity, flush the system with clean, unchlorinated freshwater to remove salt and prevent mineral buildup or biofouling. Your SolarMaax systems offer an automatic freshwater flush feature for convenience.
- NEVER use chlorinated water: Chlorine will cause irreparable damage to reverse osmosis membranes. If you use tap water from your vessel’s tanks, ensure it is run through the activated carbon filter first to remove chlorine.
- Maintain pre-filters: Pre-filters (typically 20-micron followed by 5-micron) are your first line of defense. Check them regularly (weekly with regular use) and replace them as soon as the supply pressure drops or they appear dirty. Do not wash them as this opens the pores and reduces effectiveness.
- Keep the membranes wet: Membranes must never be allowed to dry out, as this can drastically reduce their service life.
- Clean chemically when necessary: If performance drops due to organic growth (biofouling) or carbonate deposits, the membranes can be cleaned with manufacturer-approved alkaline or acid solutions.
Long-Term Storage
- Preserve (“pickle”) the membrane: If the Watermaker will not be used for an extended period (more than a week or two, or a few days in tropical climates), the system should be “pickled” with Memstor™ membrane storage solution to prevent bacterial growth. Always use manufacturer-recommended chemicals to avoid damage and follow their specific instructions for the process.
By following these best practices, a well-maintained membrane can last an average of 5 to 10 years.
